Tuesday, October 25, 2011

My yamaha blaster won't start, i just changed the spark plug and cleaned the air filter. Help please?

does it have spark? if it does your problem is gas related
My yamaha blaster won't start, i just changed the spark plug and cleaned the air filter. Help please?
Put new gas in it, make sure it is properly mixed and very clean. Also check to see if the spark plug is working. One thing to try is see if the kick start is actually connecting to the spark plug or if it has a broken connection. The best and easiest idea is to take it to a Yamaha dealer and have them check it. They will find the problem for you and that way you don't waste money on things that arent fixing the problem.
My yamaha blaster won't start, i just changed the spark plug and cleaned the air filter. Help please?
How long has it been since it was last started and how old is the gas in it? If the gas is over 3 months old it's likely the problem. Gasoline can turn to varnish very quickly when a vehicle is unused. Gasoline can also be many months old when you buy it because it's often stored for extended periods of time before being shipped off the your local station. If it's old but used right away it's OK but if you let it set around for a few months in your bike it turns to varnish and everything gets plugged up. Try spraying some starting fluid (ether) into the air intake and then start it right away. (Work quickly - it evaporates FAST.) If you don't have any buy the cheap stuff - it's all the same. If it fires up, runs a few seconds, then dies, it's not getting fuel.
Find the man who is deal with the air filter.









http://www.toboc.com/forum3/DEFAULT.ASPX鈥?/a>
clean fuel system %26amp; pilot jets