Try a box end or an open end wrench if clearances won't permit either use a socket wrench. Turn in the same direction as removing a light bulb. Install a new sparkplug and tighten only a little tighter than snug.
How do you change the spark plug in a lawn mower?
get a socket wrench you have to make sure that you have the right size socket you only have two sizes,locate the spark plug usually in the front of the engine,turn the socket so that it removes,turn i left,remove the plug install a new one,really easy good luck
How do you change the spark plug in a lawn mower?
TWIST OUT OLD TWIST IN NEW
13/16 OR 5/8 DEEP WELL SOCKET
You will need a deep well socket the size of the plug, theres 2 sizes so i'm not sure which you need. But the plug turns counterclockwise of a clock rotation to remove it. Check the gap on the new one befor putting in. tighten new plug real snug but don't play super woman or you strip out the threads. Hope this helps.
Jim
out with the old in with the new and done
Throw it in the trunk of your car, take it to Auto Zone and ask for help. They will probably change it for you. the watch how it's done
